16
Pan, Tilt and Zoom Dome Camera / ACD-1500-HT35
Once initial control of the PTZ has been established by correctly connecting RS-485, setting matching
protocol and baud rate in the PTZ and controller, and the user is able to pan, tilt, and zoom additional
features can be utilized.
All Basic Functions such as setting presets, calling presets, clearing presets, enabling auto cruise (tour),
setting auto pan, enable auto pan are listed in this section. Any PTZ controlling device can enable these
functions IF the controlling device supports at least 64 presets. Examples have been given below for
operation using the KCT-100 and KCT-2500 keyboard joystick controllers.
*
NOTE*
In the following operational description, the capital letter N represents the
number you wish to set.
Selecting the Camera
•
KCT-100: [N] + [CAM]
Ex: To select camera 1, simply press 1, then CAM
•
KCT-2500: [CAM] + [N] + [ENTER]
Ex: To select camera 1, simply press CAM, then 1, then Enter
**If successful, the Camera ID you have chosen will be shown on the controller display
Basic Functions
Basic Functions
FUNC
0
1
2
3
4
5
6
7
8
9
Enter
Clear
WIDE TELE
FAR NEAR
CAM AUTO
OPEN CLOSE
Current CamID:001
ON
OFF
F1
F2
F3
CALL PRESET SHOT
Speed Dome Cont r ol l er
LI VE
TAPE
SEQ
SWITCH
KCT-100 Controller
KCT-2500 Controller
5