12
CLEANING AND CARE
Cleaning a Frost-Free Appliance (including models starting with EQFF and EQFR)
Frost-free means that you do not have to defrost your appliance. Frost is removed by air moving and
collecting any moisture and depositing it on the cooling coil. The cooling coil periodically warms up
enough to melt the frost, and the water then flows down to the drain pan (located behind the base
grill) where it is evaporated. A complete cleaning should be done at least once a year.
1. Unplug the appliance or disconnect power.
2. Remove all contents.
3. Wash the inside walls with a solution of mild detergent in warm water or 2 tbs (26 g) baking soda
to 1 qt (0.95 L) warm water.
• Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable
fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum
products on plastic parts, interior and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can scratch or damage surfaces.
4. Rinse well and wipe dry with a clean soft cloth.
5. Use the appropriate cleaning method for the exterior finish.
•
Painted metal:
Wash exteriors with a clean sponge or soft cloth and a mild detergent in warm
water. Do not use abrasive or harsh cleaners, or cleaners designed for stainless steel. Dry
thoroughly with a soft cloth. For additional protection against damage to painted metal
exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth. Do not wax plastic
parts.
6. Plug in the appliance or reconnect power.
7. Replace all containers.
Cleaning a Cycle or Manual Defrost Appliance
Cycle defrost models utilize a system where ice builds up on the rear wall and melts when the
compressor is off. Manual defrost models continually build ice on inner walls. For CSS Models
(completely stainless steel), only use cleaners especially made for stainless steel.
NOTE:
Never use a metal object to remove ice from the rear wall of the appliance. If needed, use a
plastic ice scraper or a hair dryer.
Clean surfaces using the same instructions as for frost-free models.
Cleaning the Base Grill (some models)
1. Open the appliance door and remove the base grill by pulling down and out from the top.
2. Replace the base grill by putting the clips in the openings in the appliance panel. Push in until
the base grill snaps into place.
Changing the Light Bulb (some models)
NOTE:
Not all appliance bulbs will fit your appliance. Be sure to replace the bulb with one of the
same size, shape, base size and wattage. You can purchase bulbs from
www.summitappliance.com/support
1. Unplug the appliance, or disconnect the power.
2. Remove the light shield. Most models do not require tools.
3. Replace the light bulb with an appliance bulb of the same wattage.
4. Replace the light shield.
5. Plug in the appliance or reconnect the power.
Содержание EQFR Series
Страница 15: ...15 NOTES...
