Accucold ACR82L, Руководство пользователя

Страница: 6 / 19

6
Installing the Leveling Legs
Heavy-duty leveling legs are included so the unit may be leveled
accurately and to allow room to clean beneath the cabinet.
CAUTION: DO NOT attempt to install the level legs by yourself. You are far
less likely to incur injury to yourself or the appliance if you install the
legs with another person.
1.
Installing caster wheels: caster
wheels are included with some
models. Only use genuine caster
wheels or the base of the unit might
suffer damage. When installing the
caster wheels, it is important to
tighten them against the base rail
(see image) The top edge of the
caster wheels must make firm
contact with the base rail. The top
edge of the
caster wheels must be in firm
contact with the base rail.
Caster Handbrake
NOTE:
The caster wheels with handbrakes must be placed in FRONT of the unit.
2.
Heavy-duty leveling legs are provided so the unit can be leveled accurately
and to allow room to clean beneath the cabinet.
3.
Tilt the cabinet back just far enough to fit the front legs and place a block of
wood or some similar support under it until both front legs are in. Then tilt the
cabinet forward enough to install the rear legs.
4.
After the legs are installed, level the cabinet by using the adjustable part of the
legs as needed. This is very important to ensure proper draining and door
operation.
To lower, turn
clockwise
To raise, turn
counterclockwise
rail
2"
Leveling leg