Accucold ACFF436L Скачать руководство пользователя страница 3

3

 

 

IMPORTANT SAFEGUARDS

 

Your safety and the safety of others are very important.

 

We have attached many important safety messages in this manual and on your 
appliance. Always read and obey all safety messages.

 

This is the Safety Alert Symbol. This symbol alerts you to potential 
hazards that can kill or injure you and others. All safety messages 
will follow the Safety Alert Symbol and either the words 

“DANGER” 

“WARNING” or “CAUTION”.

 

DANGER means that failure to heed this safety

 

 

WARNING 

 

 

 

DANGER 

 

statement may result in severe personal injury 
or death.

 

 

WARNING means that failure to heed this safety 
statement  may  result  in  extensive  product 
damage, serious personal injury, or death.

 

CAUTION means that failure to heed this safety

 

 

CAUTION 

 

statement  may  result  in  minor  or  moderate

 

personal  injury,  or  property  or  equipment 
damage.

 

Safety  messages  will  alert  you  to  what  the  potential  hazard  is,  tell  you  how  to 
reduce the chance of injury, and let you know what can happen if the  user does 
not follow the instructions.

 

 

 

 

Before using your refrigerator/freezer, it must be positioned properly 
and  installed  as  described  in  this  manual,  so  read  the  manual 
carefully.  To  reduce  the  risk  of  fire,  electrical  shock,  or  injury  when 
using  the  refrigerator/freezer, follow basic precautions,  including  the 
following:

 

 

DANGER 

 

 

• 

These appliances are CFC and HFC free and contain a small quantity of liquid 
propane (R290) which is environmentally friendly, but flammable. It does not 
damage  the  ozone  layer  or  increase  the  greenhouse  effect.  Care  must  be 
taken  during  transportation  and  while  setting  up  the  appliance  so  that  no 
cooling  system  parts  are  damaged.  Leaking  refrigerant  is  combustible  and 
may damage the eyes. 

• 

In case of any damage: 

Avoid open flames and anything that creates a spark

 

Disconnect from the  power  source

 

Ventilate  the  room  in  which  the  appliance  is  in  for  several  minutes  and 
contact the Service Department for advice

 

• 

The  more  refrigerant  in  an  appliance,  the  larger  the  room  it  is  being 
installed in should be. In case of a leakage, if the appliance is in a small room, 
there  is  a  greater  risk  of  combustible  gases  building  up.  The  amount  of 
refrigerant in the appliance can be found on the rating label on the appliance. 
It  is  hazardous  for  anyone  other  than  the  Authorized  Service  Person  to 
conduct servicing or repairs to the appliance. 

• 

Take serious care when handling, moving, and using the appliance to avoid 
damaging  the  refrigerant  tubing  and  increasing  the  risk  of  a  leak. 

• 

Parts  replacement  and  servicing  shall  be  done  by  factory  authorized 
service personnel to minimize the risk of ignition due to incorrect parts or 
improper service. 

Содержание ACFF436L




















Отзывы: