10
Setting the Temperature Control
•
You can set the temperature by pressing the
UP
and
DOWN
symbols. When you press either of the
two buttons for the first time, the LED readout will show the original temperature set previously. (The
temperature preset at the factory is 39°F or 4°C.)
•
The temperature you are setting will increase by one degree each time you press the
UP
symbol, and
will decrease by one degree each time you press the
DOWN
symbol.
•
The range of set temperature settings is from 36°F to 43°F.
•
The display always shows the SET temperature. The SET temperature will flash if the actual
temperature deviates by more than 12°F from the SET temperature.
Interior Light
•
The interior light makes it easy to view your items. Pressing the
LIGHT
symbol toggles between 2
modes of operation for the internal lighting: functional (default) mode and showcase mode. If you are
in functional (default) mode, the lights will turn on only when the door is open. If you are in showcase
mode, the lights will be on whether or not the door is open.
Control Panel for ACF33L
ON/OFF Power
•
To turn the appliance off, press and hold the
key for 5 seconds until the temperature display goes
off.
•
To turn the appliance on, press and hold the
key for 1 second until the temperature display lights
up.
NOTE:
Pressing the POWER key once can switch off the audible alarm when the alarm is on.
SuperFreeze
•
SuperFreeze is used to freeze the stored items quickly. The function overrides the thermostat control
and will make the compressor operate continuously. It is not necessary to adjust the thermostat setting
when using this function. When the function is selected, the SuperFreeze indicator (The dot at the
bottom right of the display) will be ON. The function can be canceled by pressing the key again and the
indicator will turn OFF. SuperFreeze will turn off automatically after 8 hours.
UP
•
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
•
Used to decrease (cool) the set temperature by 1°C/1ºF.
