7. Select the Profile you
want to use to setup the
network. You can leave the
profile name as the default or
you can change the name of the
Profile to be the same as your
network to more easily identify it
later whenever you have to
make edits or changes. Scroll
down the page to add the SSID
and Association Type.
8. Tap into the box of the SSID (Network Name) and enter the
network name. **
This is case sensitive so be sure to type it in
correctly as it is setup.
9. Tap the Association dropdown for the network security type of
the network. This is typically defaulted to WPA2 but the
network could be setup to require different. Scroll down to
enter the Pre-Shared Key (Network Password).
10.
Tap into the box of the Pre-Shared Key and enter it. **
Again,
this is case sensitive so be sure to type it in exactly as the network is
setup.
11. Click OK when finished to accept the settings and then click
OK again to exit out to the Wireless Center to verify the Wi-Fi Network
has accepted the setting and is connected to the network that was
setup in the settings.
