11
3. Operation Description (continued)
3.3 Watermark Verification Operation
Press the WM function button to turn the WM screen ON. The entire
inspection area will be illuminated to make the bill’s analysis procedure
easier and faster. Proceed to verify the watermark features embedded in the
bill or document and confirm their authenticity. The absence, displacement,
or low quality of this feature will indicate the bill is not genuine.
The internal timer will keep the WM ON for about 50 seconds. If more time
is needed to finish the verification, you can press the WM button.
3.4 Magnetic Verification Operation
Once the detector is turned ON, the magnetic circuitry is already active and
remains so while the unit is ON.
Proceed to rub the area of the bill that must contain magnetic ink against the
magnetic head. If the verification window flashes GREEN and BEEPS at the
same time, it confirms the Magnetic ink feature is present on the area just
verified. In case none of these signs are present, it means there is not MG ink
in the scanned area.
