10
4. Control Panel Description (continued)
"PRINT" key
Long press this key to print a receipt with the counting details.
"CLEAR" key
Short press this key to remove the individual set value.
Short press this key to remove the individual counting result (clear the
flashing individual result after pressing the key "+" or "-")
Long press this key to remove all the set or all the counting results.
"START/STOP" key
Used to start counting or stop counting.
Batching example
The unit is set up by default with the maximum quantity of coins for every
denomination per tray and roll (quantities may vary depending on the
currency programmed).
LCD Display
Mode
TRAY
0.01
300
Batch Quantity
Currency
USD
0.05
400
0.10
BAT
400
0.25
300
1.00
100
1.
Press
BAT/MODE
to select the sorting mode.
2.
Press
SET
to enter the batch menu; press
SET
again to select the
desired denomination to modify.
3.
Press
CLEAR
to clear the batch value.
4.
Press
BAT/MODE
to increase the batch value by 10 and 20 units.
5.
Pressing
+
and
-
increases and decreases the batch value by 1 unit.
6.
Press
START/STOP
to confirm the batch selection.
