3025-2F MULTI-VIEWING MICROSCOPE SYSTEM
ACCU-SCOPE
®
5
ASSEMBLY
(continued)
Mounting the Bridge
Position the bridge as shown and carefully insert
the front of the bridge into the opening on the top
of the microscope (Fig. 4). Using the enclosed
2.5mm Allen wrench, tighten the lock screw by
turning clockwise.
Mounting the Trinocular Head (Fig. 5)
Carefully attach the trinocular head as shown (Fig.
5) to the front of the microscope bridge. Using the
enclosed 2.5mm Allen wrench, tighten the lock
screw by turning clockwise.
Mounting the Binocular Head (Fig. 6)
Carefully attach the binocular head as shown (Fig.
5) to the rear of the microscope bridge. Using the
enclosed 2.5mm Allen wrench, tighten the lock
screw by turning clockwise.
Fig. 4
Fig. 5
Fig. 6
Lock screw
Lock screw
Lock screw
(On other side)
