0 8403414001 (01) 2017-11 EN-USA • Accu-Chek Inform II Addendum to Operator’s Manual
7
Connecting the Accu-Chek Inform II Base Unit Light (NEW)
1
Slide the base unit upward and remove it from the
wall mount (if in use).
2
Connect the power supply to the power input jack.
(The Base Unit Light NEW requires a new power
supply, REF 07455976190. For ordering details, see
page 10.)
3
If you want to connect the Accu-Chek
Inform II Base Unit Light (NEW) in a wired
environment for network connection:
Connect
an RJ25 cable from the Accu-Chek Inform II Base
Unit Hub to the RJ25 port on the Base Unit Light
(see illustration on previous page). Use only the
RJ25 cable provided with the Base Unit Hub.
4
Slide the base unit back onto the wall mount (if in
use).
NOTICE
To ensure continuous safe and reliable operation, use
only the power supply unit provided for the Accu-Chek
Inform II system (for ordering information see page 10 of
this Addendum).