Beep tone
Press and hold down
(for more than 3 seconds)
Time &
Date
Time-and-
date format
Hours
Minutes
Time
Date
Year
Month
Day
Press briefly
(turn off)
On
(On1)
Off
(OFF)
Acoustic Mode
(On2)
Press briefly
(turn off)
Target range
Off
On
Value
Lower limit
(LL)
Off
On
Value
Upper limit
(LH)
Press briefly
(turn off)
Alarm clock function
Press briefly
(turn off)
Press briefly
(turn off)
Turning on the meter
and starting Quick
set-up
Off
On
Hours
Minutes
AL1
AL2
AL3
AL4
Top and sides
Þ
button: turn on or off, start a set-up to
change settings, save entries
Liquid crystal display (LCD)
<
and
>
buttons: change settings (decre-
ment and increment value, respectively),
retrieve results, request averages
Test strip guide – this is where you insert the
test strip
Measurement optics cover
Test strip ejector
Code chip
Infrared port for downloading results to a PC,
for instance
Bottom
Code chip
Code chip slot
Type plate
Battery compartment
Battery (type CR 2032)
1
Set-up
2
When an average is displayed: number of days
covered
3
LH or LL: target range setting (set-up)
4
Alarm clock function turned on.
Flashing: optical signal during alarm
5
Test or averaging in progress
6
Unit of measurement for BG result
7
Flag indicating special result
8
Flashing: cue to allow test strip to draw up
blood
9
Flashing: cue to insert test strip
10
Test strips are past their expiry date
11
Code number display.
Flashing: code chip is missing
12
Target range setting (set-up).
Flashing: result is outside the target range
13
Flag indicating quality control
14
Flashing: temperature is/was outside the
permitted range
15
Beep tone or Acoustic Mode is turned on
16
Flashing: battery is running low
17
When an average is displayed: number of
results included
18
Memory, averages or results download
19
Follows time in 12-hour format
20
Display messages
Code chip is missing.
In memory: no results in memory, averaging
not possible or result erased
Alarm setting (set-up)
Flashing: latest result being erased
End of set-up, self-test following test or
download complete
In Quick set-up: group selected
Result >600 mg/dL (33.3 mmol/L)
Result <10 mg/dL (0.6 mmol/L)
Results download
Error messages
E-1
Test strip inserted incorrectly, test strip
bent/moved, strong electromagnetic
field
E-2
Code chip from another system, meter
cannot read code chip, code chip defec-
tive, code chip removed during test
E-4
Measurement optics dirty, test strip
drew up blood too soon, test strip bent/
moved, used strip inserted, test strip
past its expiry date, new test strip inser-
ted too soon after last test (while End
was showing)
E-6
Test strip drew up too little blood, test
strip drew up blood too soon, test strip
bent/moved, battery empty, meter error,
strong electromagnetic field
EEE
Meter error
ttt
Temperature too low or too high to test.
Quick set-up: Changing settings
Þ
press and held down for more than 3 seconds at
anytime = save, exit set-up and turn off
< >
change with
<
or
>
press briefly = save or scroll
17
18
16
15
14
13
7
6
5
4
20
3
2
1
11 10 9
8
19
12
