manualshive.com logo in svg

Accton Technology WA6102X, Руководство пользователя

Поделиться
Скачать
Accton Technology WA6102X Скачать руководство пользователя страница 4

C

OMPLIANCES

ii

High power radars are allocated as primary users (meaning they have priority) of 
the 5250-5350 MHz and 5650-5850 MHz bands. These radars could cause 
interference and /or damage to the access point when used in Canada.

The term “IC:” before the radio certification number only signifies that Industry 
Canada technical specifications were met.

Industry Canada - Class B

This digital apparatus does not exceed the Class B limits for radio noise emissions 
from digital apparatus as set out in the interference-causing equipment standard 
entitled “Digital Apparatus,” ICES-003 of Industry Canada. 

Cet appareil numérique respecte les limites de bruits radioélectriques applicables 
aux appareils numériques de Classe B prescrites dans la norme sur le matérial 
brouilleur: “Appareils Numériques,” NMB-003 édictée par l’Industrie.

Safety Compliance

Power Cord Safety

Please read the following safety information carefully before installing the device:

WARNING: 

Installation and removal of the unit must be carried out by qualified 

personnel only.

• The unit must be connected to an earthed (grounded) outlet to comply with 

international safety standards.

• Do not connect the unit to an A.C. outlet (power supply) without an earth 

(ground) connection.

• The appliance coupler (the connector to the unit and not the wall plug) must have 

a configuration for mating with an EN 60320/IEC 320 appliance inlet.

• The socket outlet must be near to the unit and easily accessible. You can only 

remove power from the unit by disconnecting the power cord from the outlet.

• This unit operates under SELV (Safety Extra Low Voltage) conditions according 

to IEC 60950. The conditions are only maintained if the equipment to which it is 
connected also operates under SELV conditions.

France and Peru only

This unit cannot be powered from IT

†

 supplies. If your supplies are of IT type, this 

unit must be powered by 230 V (2P+T) via an isolation transformer ratio 1:1, with 
the secondary connection point labelled Neutral, connected directly to earth 
(ground).

†

 Impédance à la terre

Содержание WA6102X












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды