Accton Technology MR3201A Скачать руководство пользователя страница 3

We'll show you a specific form for you to register your access point in 
the MR3201A Community.

If you don't register it, we'll show you a reminder alert in the User Zone 
like the one in the figure.

1.

Find the "Wireless Network Connection" icon in your computer.

In Windows XP, it is located in the task bar (see figure).
For other operating systems, check the User Manual.

2.

Right click with your mouse on this icon and select "View available 

wireless networks" and a window similar to this one will appear:

Quick Installation Guide

55

4.

Connect to MR3201A

Your device (laptop, desktop computer, etc.) must have a wireless network
card to be able to find and connect to WiFi networks.

If your device isn't WiFi-ready, check the User Manual in the CD to configure 
MR3201A using a network cable.

Register MR3201A

Private

Public

a

b

MR3201A sends out two WiFi signals: a public one (MR3201A_AP) and a private
one (MyPlace).
If you can't see signals, click on the "Refresh network list" button ( a ).
If the problem persists, check that you've installed MR3201A properly.
If you see MR3201A private signal but do not find the public signal, check the
User Manual, since you will need to make some network configuration
adjustments in MR3201A.

3.

MR3201A needs to be registered through public signal. Select

the "AP" signal and click on the "Connect" button ( b ).
A few seconds later you'll see a message informing that you're 
connected to the "AP" signal.

4.

Open your browser (Internet Explorer, Firefox...) and you'll see 

Access Portal.

5.

To access your User Zone, log in with the email and password you used

to register in the MR3201A Community.

ENGLISH

Отзывы: