VR-200 16-Port Multi-WAN VPN Router
• 36 •
z
Type:
There are two types of QoS, including Rate control and Priority.
z
Interface:
Click on the square box to enable priority on specific WAN ports.
z
Service:
Select the Service from the pull-down menu.
z
Source IP:
Enter your Source IP address. The default value is Zero which includes
all internal IP addresses.
z
Direction:
Select
Upstream
(for outbound Traffic) or
Downstream
(for inbound
traffic) from the pull-down menu. If users would like to download data, please
choose the
Downstream
from the pull-down menu.
z
Minimum Rate (Min. Rate):
Enter the guarantee/minimum bandwidth. For example,
enter 200 in the square box and the device will guarantee 200kbps/Sec for the
specific service
z
Maximum Rate (Max.
Rate):
Enter the Maximum bandwidth. For example, enter
700 in the square box and the specific service will not exceed 700kbps.
z
Bandwidth sharing:
There are two options, “Share bandwidth with total IP
addresses” and “Assign bandwidth for each IP address.” When selecting “Share
bandwidth with total IP addresses”, the IP address range you enter will share the
min. and max rates you enter above. When selecting “Assign bandwidth for each IP
address”, anyone of the IP address range you enter will be assigned the same min.
and max rates you enter above.
z
Enable:
If users click on the
square box, the settings will be enabled
.
Otherwise,
users are only adding the services to the list but not enabling them.
z
Add to list icon:
Click this icon and configure as many entities as you like.
The
maximum entry is 30. You can also delete the selected application.
If the Service you need is not listed in menu, please click the Service Management button to
add new Service and enter the Protocol and Port Range. Then click the Apply Save Setting
Содержание Edge-Core VR-200
Страница 1: ......
Страница 4: ...VR 200 16 Port Multi WAN VPN Router iii Logout 120 ...
Страница 5: ......
