Accton Technology Cheetah PCI Adapter, Быстрое руководство по установке

Страница: 9 / 14

Cheetah PCI Adapter
9
computer and run the diagnostics again to see if the
problem persists. If it does, record the failure indicated and
contact Accton’s Technical Support for assistance.
Troubleshooting
Check the following troubleshooting items before contacting
Accton Technical Support.
PCI Compatibility
Some PCI computers are not self-configuring and require you
to perform some or all of the following functions by
motherboard jumper changes and/or BIOS Setup program
configuration:
• Make sure your BIOS correctly supports the PCI Local
Bus Specification v2.0 or later and upgrade your computer
BIOS to the latest version.
• Verify that the PCI slot is an enabled bus-master slot and
not a slave PCI slot. In some computers the PCI slot must
be configured to enable bus mastering. Refer to your PC’s
manual and check the PCI BIOS Setup program to be sure
the PCI slot is an enabled bus-master slot.
• In some computers, you may be required to disable Plug ‘n
Play (PnP) in the BIOS Setup program if resources are not
properly assigned between installed cards.
• Some computers may require you to reserve interrupts
and memory addresses for installed ISA cards to prevent
PCI cards from using the same settings. Refer to your
PC’s manual and check the PCI BIOS Setup program
configuration options for ISA cards.
• Make sure the PCI slot is configured to support INTA.
• Be sure that INTA for the slot is assigned to a free interrupt
(IRQ) number.