– 1 –
Quick Start Guide
E052024-CS-R02
150200002668A
64-Port 800G Ethernet Switch
AS9817-64O
1.
64-Port 800G Ethernet Switch AS9817-64O
2.
Slide-rail mounting kit—2 rack slide-rails and install guide
3.
AC power cord, type IEC C20 (included with AC PSUs only)
4.
DC power cord (included with DC PSUs only)
5.
Documentation—
Quick Start Guide
(this document) and
Safety
and Regulatory Information
1.
64 x 800G OSFP800 ports
2.
Management Ports: 1 x 1000BASE-T RJ-45, 2 x 25G SFP28,
RJ-45 console, USB
3.
Timing Ports: 1PPS, 10 MHz, TOD
4.
System LEDs
5.
2 x grounding screws
6.
2 x AC or DC PSUs
7.
4 x fan trays
1
6
7
3
5
2
4
Fan Tray Replacement
1.
Pull the handle release latch.
2.
Remove the fan tray from the
chassis.
3.
Install a replacement fan with
matching airflow direction.
PSU Replacement
1.
Remove the power cord.
2.
Press the release latch and
remove the PSU.
3.
Install replacement PSU with
matching airflow direction.
Caution:
During switch operation, fan replacement should
be completed within two minutes to prevent the switch shutting
down due to its built-in over-temperature protection.
Attention:
Pendant le fonctionnement du commutateur, le
remplacement du ventilateur doit être effectué dans les deux
minutes pour éviter que le commutateur ne s'arrête en raison
de sa protection intégrée contre la surchauffe.
Package Contents
Overview
FRU Replacement
1.
OSFP800 LEDs:
Purple (800G), Blue (400G), Cyan (200G),
Green (100G), Red (50G)
2.
RJ-45 MGMT LEDs:
Left: Green (link/act), Right: Green (speed)
3.
SFP28 LEDs:
Green (link/activity)
4.
System LEDs:
LOC:
Flashing Green (switch locator)
DIAG:
Green (OK), Red (fault)
ALRM:
Red (fault)
FAN:
Green (OK), Red (fault)
PSU1/PSU2:
Green (OK), Red (fault)
5.
RST:
Reset button
1
2
2
3
5
4
System LEDs/Buttons
1
2
3
5
www.accton.com
4