Accton Technology 12se Скачать руководство пользователя страница 20

18

Warranty

Accton warrants to the original owner that the product delivered in this package will be
free from defects in material and workmanship for the lifetime of the product.  For the
warranty to apply, you must register your purchase by returning the registration card
indicating the date of purchase and including proof of purchase.  There will be a minimal
charge to replace consumable components, such as fuses, power transformers, and
mechanical cooling devices.  The warranty does not cover the product if it is damaged in
the process of being installed.  Accton recommends that you have the company from
whom you purchased this product install it.

THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER
EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  PURPOSE, OR
ANY WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.
ACCTON SHALL NOT BE LIABLE FOR  INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ACCTON NEITHER ASSUMES  NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY.

Copyright

Copyright 

 1997  by  Accton Technology Corporation. All rights reserved. Product

specification are subject to change without notice. All trademarks or brand names are
properties of their respective companies.

Disclaimer

The publisher assumes no responsibility for errors that may appear in this
document, nor does it make any commitment to update information it contains.
All brand and product names mentioned are trademarks or registered
trademarks of their respective companies.

For warranty information:

Accton Technology Corporation,  International Headquarters
No. 1, Creation Rd. III, Science-based Industrial Park, Hsinchu  300, Taiwan, R.O.C.
Phone: 886-3-5770-270     Fax: 886-3-5770-267     BBS: 886-3-5770-654

Содержание 12se






















Отзывы: