EX.)Basketball game(Press the buttons in the following order:
( A)
→
(
A)/(A)
→
…
→
(
A)
→
(B)
1.Pull out the crown when the
second hand is at the 12 0'
clock position. The second
hand will stop on the spot.
*Do not press any button..
Otherwise, the chronograph
Hands will move.
1. pull out the crown.
2.Press button (A)or (B) to reset the
stopwatch second and minute hands
to “0”position.
*By pressing button (A),the hands
move clockwise.
*By pressing button (B),the hands
move counter clockwise.
3.Push the crown back the
Normal position.
3.Push the crown back in to the
normal position in accordance
with a time signal.
2.Turn the crown to set the hour,
minute and 24-hour hands to the
desired time.
As the hour hand moves, the 24-
hour hand also moves correspondingly.
when setting the hour hand, check
that the 24-hour hand is set properly.
RESET
(
Reset
to
“
0
'
00
”)
START
(Start of game)
→
RESET
STOP
STOP (Time out)
RESTART
(
Restart
of
game
)
(
Game
over
) →
→
START
→
STOP
(
Finish
)
→
a) Calibrating the Stopwatch hand Position
Before setting the time, check if the Stopwatch second and minute
hands are at “0” (12 0'clock) position.
If the stopwatch is in use, press the button in the following order to
reset it, and then, check if the hands return to “0” position. (For
details, see “HOW TO USE THE STOPWATCH”)
If the stopwatch is counting: (A)
→
(B)
If the stopwatch is stopped: (B)
If either of the stopwatch hands are not at the “0” position, reset them
following the procedure below:
Note: When you push out the crown and push back the crown, the
RCC function will be eliminated. To activate the RCC function, please
follow the
Watch Hand Calibration for RCC function
b) Time Setting for non-RCC function
*Before setting the time, check that the chronograph measurement is
stopped.
10. How to use the Stopwatch
*The measured time is indicated by the stopwatch hands that move
independently of the center and 24-hour hands.
*The stopwatch can measure up to 60 minutes in seconds.
(Standard measurement)
EX
.
) 100m race (Press the buttons in the following order
(A)
→
(A)
→
(B)
(Accumulated elapsed time measurement)
*Restart and stop of the stopwatch can be repeated as many times as
necessary by pressing button(A).
PI-EXW2169
Environmental Protection
Disposal of electrical & electronic equipment
Do not dispose of this product with household waste. For
the proper treatment, recovery and recycling please take
this product to the appropriate collection point. If you are
unsure of where this is contact your local authority.
Improper disposal may be harmful to the environment.
Disposal of electrical & electronic equipment Do not
dispose of this product with household waste. For the
proper treatment, recovery and recycling please take this
product to the appropriate collection point. If you are
unsure of where this is contact your local authority.
Improper disposal may be harmful to the environment.
OUR GUARANTEE
Your watch is guaranteed for 12 months from the date of purchase
against any faults arising from defective materials or manufacture.
Damage caused through careless handling, misuse or in transit is
expressly excluded. Should this watch fail within 12 months please
return it in the first instance to your retailer.
If you have any queries, problems or do not understand any
part of these instructions please contact:
Customer Help Line 01908 449208 or Local 0845 1207208
Mon – Fri 9am-4.30pm
e-mail for service:
[email protected] or visit www.acctim.com
Battery Change Service
Acctim can offer you a battery change service for a fee of £10.00.
Should you want to take up this offer then please send your watch
along with your cheque for £10.00 payable to Acctim Limited to:
Watch Department, Acctim Limited, Acctim House,
Jenna Way, Newport Pagnell, Buckinghamshire, MK16 9QJ
8.Forced Synchronizaton and halt Synchronization
If you want the watch to attempt synchronization, you can force the
watch to do so by pressing the hidden pusher button ( D) for 5
seconds. This will activate synchronization. The bottom second
hands will point to RX. If the watch is in synchronization mode then
press the hidden pusher
will halt the
synchronization .
9.Manual setting for Non Radio Controlled setting
If your location cannot receive Radio Controlled signal, you can
simply pull out the crown and push back the crown. The RCC function
of the watch will be eliminated. To start the RCC function, please
follow the
Watch Hand Calibration for RCC function
button ( D) for 5 seconds
5 Seconds
5 Seconds