English
33
Appendices
4
Make sure the projection screen is between the required distance
4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 16.
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
4
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
4
Select “Management Projection” from the OSD and adjust the
projection direction.
Problem: Lamp burns out or makes a popping sound
4
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp”.
Problem: LED lighting message
Message
Power-LED
(Green/Red)
Temp-LED
(Red)
Lamp-LED
(Red)
Standby
Red
Warm up (Go to Normal)
Flash Green
Normal
Green
Cooling down (Go to Stndby)
Flash Red
Error (Lamp fail)
Error (Fan locked)
Flash Red
Error (Over Temp.)
Steady light =>
No light =>
