Gear Box Removal
1
. Remove the six phillips screws from the gear box cover.
2.
Remove the gear box cover
Motor Removal
1.
Remove both metal and nylon double drive gears.
2.
Remove the eight philips screws that secure the motor
in place, remove motor.
External Cleaning
Make sure you disconnect the shredder from its power source
before cleaning. The cover and cabinet may be cleaned with
a soft cloth moistened with a mild detergent and warm water.
Do not use chemical cleaners or solvents as these may have
a harmful e ect. Use detergent sparingly to avoid contact with
electronic components.
Inspection
Whenever the cover has been removed for corrective mainte-
nance, visually inspect for defects such as loose screws or
nuts, damaged wire insulation, loose terminals, etc. Correct
any defects before returning the shredder into service.
5.0 Troubleshooting
9
