ACCO Brands NOBO X23M, Руководство пользователя

Страница: 28 / 31

The projector will detect the lamp life itself. It will show you a
warning message “Lamp is approaching the end of its useful life
in full power operation. Replacement Suggested!” When you see
this message, change the lamp as soon as possible.
Make sure the projector has been cooled down for at least
30 minutes before changing the lamp.
Lamp Changing Procedure:
1
Turn off the power to the projector by pressing the Power button.
2 Allow the projector to cool down at least 30 minutes.
3 Disconnect the power cord.
4 Use a screwdriver to remove the screw from the cover .
5 Push up and Remove the cover .
6 Remove the two screws from the lamp module .
7 Pull out the lamp module .
To replace the lamp module, reverse the previous steps.
4
3
2
1
28
A P P E N D I C E S
REPLACING THE LAMP
Lamp compartment
is hot! Allow it to
cool down before
changing lamp!
WARNING
ê
!
To reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp
bulb. The bulb may
shatter and cause
injury if it is dropped.
WARNING
ê
!
1
3
2
4