ACCO Brands NOBO X20M, Руководство пользователя

Страница: 12 / 29

12
I N S T A L L A T I O N
POWERING OFF THE PROJECTOR
Press the “Power / Standby” button to turn off the projector lamp.
You will see a message “Power off the lamp?” on the on-screen display.
Press the “Power / Standby” button again to confirm.
Otherwise the message will disappear after 5 seconds.
“Power / Standby” LED indicator will light solid amber for about 30 seconds.
After the “Power / Standby” indicator starts flashing, you can turn off the
main power switch on the side of the projector.
If you want to turn on the projector again, you must press the “Power /
Standby” button within 90 seconds of the indicator flashing.
Do not turn on the projector immediately following this Power Off
procedure.
1
2
3
4
When the “TEMP” indicator lights solid
orange, it indicates the projector has been
overheated. You will see a message “Over
Temperature” on the on-screen display. The
projector will automatically shut
itself down. Under normal conditions, the
projector can be switched on again for your presentation.
If the problem persists, you should contact your local dealer or
our service centre.
When the “LAMP” indicator flashes green
for about 10 seconds, you will see a message
“Fan Fail” on the on-screen display.
Please contact your local dealer or our
service centre.