Acclaim Lighting Spectrum AL Cove DMX, Руководство пользователя

Страница: 6 / 14

4
www.acclaimlighting.com
INSTALLATION
When installing each AL Cove DMX fixture, ensure that the surface is level and that nothing
is protruding to damage the mounting bracket(s). Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
MOUNTING
Each mount bracket has two slots measuring 0.39” x 0.18” (10 x 4.5mm) and the base has
a thickness of 0.08” (2mm). Select bolts or screws (not supplied) that fit the mount bracket
base(s) correctly and are particularly suited to the mounting surface.
Ensure that each mount bracket is securely fixed
to the mounting surface with appropriate screws/
bolts. If necessary, use a 1/8th (3mm) Allen
wrench to loosen each mount bracket to
allow them to slide along the length
of the fixture to the required position
before re-tightening.
Note: It may be necessary to temporarily
remove the mounts from the AL Cove DMX unit
in order to fix them to the surface. Once
the locking bolts are loosened, the
brackets should slide out quite easily.
Locking bolt
(1/8th / 3mm Allen
wrench required)
20
O
20
O
MOUNT ADJUSTMENT
The two swivel mount brackets attached
to each AL Cove DMX fixture allow tilt
angles, in both directions, of roughly 20
degrees from vertical to be achieved. Use
a 1/8th (3mm) Allen wrench to adjust the
tilt angle.