Acclaim Lighting Flex Tube SC G2, Руководство пользователя

Страница: 7 / 30

5
www.acclaimlighting.com
UNPACKING
CAUTION: Each Flex Tube contains a delicate LED emitter tape which is designed to
bend in one plane only (model dependent). Always take great care to avoid twists
and kinks or bends in the opposite plane from the intended vertical or horizontal
curvature. Damage can be caused by incorrect handling, resulting in a failed product.
•
When unpacking from the supplied box, always extract the Flex Tube by carefully pulling
it out through the intended box opening:
•
Never pull the Flex Tube up from the coil:
•
Keep the Flex Tube as straight as possible prior to installing into the mount channel.
•
Never bend the Flex Tube more than 15 O from straight (in the opposite plane from the
intended vertical or horizontal curve - model dependent).
•
Installation requires two people in order to prevent potentially damaging bends or kinks.
See “Two person install” on page 4.