Acclaim Lighting Aria Wireless DMX, Руководство пользователя

Страница: 11 / 16

9
www.acclaimlighting.com
DMX
IN
ORIGINAL
TRANSMITTER
FINAL
RECEIVER
DMX OUT
REPEATER PAIR
Tx
Rx
CREATING A REPEATER
In situations where a long distance needs to be covered but signal strength is insufficient,
you may be able to solve the issue by using an extra pair of Aria transceivers to create a
repeater. Located between the original transmitter and final receiver, the repeater pair will
take the signal from the former and boost it for the latter.
TO CREATE A REPEATER
1 Determine a suitable location that lies between the original transmitter and final receiver.
Mains power and a suitable mounting surface will be required.
2 Mount the two new Aria units so that their respective antennas are at least 6.5 feet (2
meters) apart and have as clear a path as possible to the units they will be linking with.
3 Connect the DMX output lines of the Repeater Rx unit to the DMX input lines of the
Repeater Tx Aria unit. Ensure their common signal grounds (green) are connected.
4 Connect both units to the mains power within suitable protective enclosures.
5 Set the address of the Repeater Rx unit to match that of the original transmitter.
6 Set the address of the Repeater Tx unit and the final receiver to an address that is not
immediately adjacent to the address used by the other two units (e.g. if one pair use
channel 12, do not use 11 or 13 for the other pair).
7 When operating, check the signal strength bars on the receivers achieve three or more.