12
www.acclaimlighting.com
Standalone mode: OFF
9
6
8
10
7
ON
STANDALONE MODE USING INTERNAL CHASE PROGRAMS
In standalone mode, all four ports are treated as one group.
Note: all switch settings can be
changed when the driver is off or on
. To configure the Aqua Driver 150 for standalone chase
mode you need to:
1 On the large switch block, set switch 10 OFF to
choose standalone mode.
Fade time
3
2
4
1
Program
9
6
8
10
7
ON
Speed
6
3
5
7
4
2 Use switches 1 to 3 of the large switch block to choose
the required fade time between chase steps. If all three
switches are OFF, the chase states will snap between
each other. All three switches ON will produce the
smoothest fade
(Note: switch 3 is weighted as the most
significant bit)
.
3 Use switches 4 to 6 of the large switch block to choose
the required speed of chase. If all three switches are OFF,
the chase will run at its fastest speed, with 0.1 seconds
between steps.
4 5 6
Speed
OFF OFF OFF
0.1
seconds
ON OFF OFF
0.2 seconds
OFF ON OFF
0.5
seconds
ON
ON OFF
1 second
OFF OFF
ON
5 seconds
ON OFF ON
10
seconds
OFF
ON
ON
20 seconds
ON
ON
ON
30 seconds
4 Use switches 7 to 9 of the large switch block to
choose the required program. If all three switches
are ON, an Auto mode will cycle between all of
the available programs.
Содержание Aqua Drum EO
Страница 1: ...User guide Aqua Drum...
Страница 2: ......
Страница 29: ...27 www acclaimlighting com...
Страница 30: ...www acclaimlighting com...
