Acclaim Lighting AL DRIVER 200, Руководство пользователя

Страница: 15 / 44

13
www.acclaimlighting.com
MODE
DMX512
LOAD
RGBW
CHANNEL
nnn/M0
ADDRESS
001
LASTHOLD
NO
GLIDE
YES
STATE
NO DMX
VERSION
1.02
Determines the control method to be used. Options are: DMX512, DALI,
1-10V, 0-10V, MANUAL and AUTO. See page 18.
Selects the nature of the LED loads that will be placed on the output ports:
Options are RGB, RGBW, Ai Dim, WHITE and DW. See pages 19 to 21.
Determines how the output ports should be distributed between the
chosen DMX address range. See pages 19 to 21.
Allows you to set the DMX start address. The total number of DMX
channels required depends on a combination of the LOAD and CHANNEL
settings. See page 22.
When set to ON, the last received set of DMX values will be latched and will
remain on the outputs during instances of signal loss.
When set to YES, any rapid changes in the DMX input values will be
smoothed to produce more gentle dimmed power outputs.
Displays the current status of the DMX input signal.
Displays the current internal firmware version.
Displays the maximum internal temperature that the unit has encountered
during operation (in degrees Centigrade).
Displays the minimum internal temperature that the unit has encountered
during operation (in degrees Centigrade).
If the OK button is pressed, the logged maximum and minimum
temperature levels are cleared.
MAIN MENU ITEMS (WHEN MODE SET TO DMX512)
Displays the current internal temperature of the driver (in degrees
Centigrade).