-2-
CONNECTION & OPERATION
The user may use a professional software to set the DMX address for AL-BAR-AC-DMX-1200-RGB and the auto &
fixed address modes are programmable. The auto-address was set as factory default .
2
)Auto-address
Link up multi
.
The DMX 512 Signal is able to link up to 17pcs of
and the specific DMX-1000K
Signal can link up to 60pcs
AL-BAR-AC-DMX-1200-RGB
AL-BAR-AC-DMX-1200-RGB
.The LED's channels will increase automatically in the sequence. In the first
AL-BAR-AC-DMX-1200-RGB, the Red of the first segment is the first channel, the Blue of the last segment is the
30th channel, each segment RGB can be controlled separately.
1 channel controls the Red of the 1st segment
2 channel controls the Green of the 1stsegment
3 channel controls the Blue of the 1st segment
4 channel controls the Red of the 2nd segment
....................................
the rest may be deduced by analogy
The receiving initial address of the first AL-BAR-AC-DMX-1200-RGB is 1, the second AL-BAR-AC-DMX-1200-RGB
receiving initial address is 30x1+1=31, the rest may be deduced by analogy.
3
In this mode(the address have been fixed),
)Fixed address
AL-BAR-AC-DMX-1200-RGB permits both the in & out port serves as the
input end for receiving the DMX signal.
While synchronously connect the in & out port to DMX signal, if any signal malfunction happened in system, the
system still can be controlled as normal. That is to say, any signal malfunction happened to an
in system which will not affect the normal operation for the other online fixtures, this is the salience of
AL-BAR-AC-DMX-
1200-RGB
AL-BAR-AC-DMX-1200-RGB.
When any malfunction happened to system, it does not allow to set fixed address. In a general way, the fixed
address mode can be set only if the system is normally running in auto-address mode.
Note:
1)Online
a.)Max 40pcs AL-BAR-AC-DMX-1200-RGB are allowed on the line of AC120V input.
b.)Max 75pcs AL-BAR-AC-DMX-1200-RGB are allowed on the line of AC230V/277V input.
