1. General information
1.1 Hand-held cordless engraving machine (hereinafter referred to as engraver) is a high-quality precision tool that, using a
wide range of attachments, can perform various work on small items (blanks): grinding, engraving, milling, cutting, cleaning
and polishing.
1.2 Type of climatic version of this model UHL 3.1 according to GOST 15150-69 (P 3.2), that is, this model is designed to work
in a temperate climate with an operating temperature range of -10 to +40 ° C and relative humidity of not more than 80%.
Powered by built-in battery.
1.3 The single-phase double-insulated DC commutator motor installed in the engraver (class II machine according to GOST R
IEC 60745-1-2011) provides maximum electrical safety during operation and does not require grounding. The engraver is
designed for intermittent operation (S3) with a nominal period of time: work / break - 20 min / 5 min. The degree of
protection provided by the shell is IP20 (IEC 60529). Torque from the engine armature is transmitted to the collet chuck
(collet with clamping nut). The main working part of the engraver - various holders and bits are attached (see Fig. 2). On the
body of the engraver, the arrow indicates the direction of rotation of the cartridge.
1.4 Transportation of the tool is carried out in closed vehicles in accordance with the rules for the carriage of goods in force
on this type of transport.
2. Main technical characteristics
2.1. The main technical characteristics of the screwdriver are listed in table below
Power consumption
130 Вт
Voltage
230V, 50Hz
Idle speed
10000-32000
rpm
Number of speeds
6
Collet chuck size
Up to 3,2 mm
Electric motor
collector single-phase
Power cord length with plug
1,8 m
3. Package supply
3.1 The engraver is supplied for sale in the following configuration:
Cordless engraving machine
1 pc.
Instruction
1 pc.
Storage case
1 pc.
A set of tools and accessories
1 set
4.
Description of the product
