Flexible LED light
The
Solar ReStore
is equipped with a side-loaded,
(5) Flexible LED light.
It pro-
vides 20 hours of continuous light on a single charge. It can be used as a reading
light, emergency backup light, for camping and more. Simply slide the
(3) Control
switch
the LED position to turn on the light. Slide the
(3) Control switch
to the
OFF position when you are finished so that you do not drain the
Solar ReStore’s
battery power.
Troubleshooting
When I connect my device to the Solar ReStore, it does not begin charging.
- Make sure that you have charged the
Solar ReStore’s
internal backup battery by
either solar, USB, or AC charging. Press the
(8) CHECK button
on the
(6) Capacity
indicator
to see how much battery power is left.
- Check to see that the
(3) Control switch
is in the ON position and that the
(4)
Status LED
is glowing BLUE.
- Please ensure that both ends of the USB cable you are using are securely and
fully connected.
The Solar ReStore is not charging my device by solar power.
- The
Solar ReStore
is not designed as an ACTIVE solar charger. You must first
place the
Solar ReStore
in direct sunlight for 1-6 hours, and please be sure that
the
(3) Control switch
is in the OFF position. After it has charged in direct
sunlight, you should then connect your device to the
Solar Restore
for a bat-
tery boost. Please note, 6 hours of direct sunlight is required to charge the
Solar
ReStore
to 50% capacity. You will see the
(4) Status LED
glow RED to indicate
solar charging.
- Please make sure that the
(5) Flexible LED
light is not on.
Содержание Solar ReStore
Страница 1: ...INSTRUCTION MANUAL S E R I E S TM ...
