Accessory Power GoCharge, Инструкция по эксплуатации

Страница: 4 / 8

Using the GoCharge Power Pack for ON-THE-GO Charging
LED Flashlight Function
Using the GoCharge USB Power Pack as a Dual Car Charger
The GoCharge Power Pack has a 2000mAH backup battery which enables you
to charge a single USB device without being plugged into an AC or DC outlet. It
also comes with 3 USB charging cables for the most popular digital devices:
(b)
MicroUSB Cable, (c) MiniUSB Cable, and (d) USB cable for iPhone® and iPod®.
You can check the GoCharge Power Pack’s backup battery level by pressing the
(2) Battery meter button. The (1) Battery meter is easy to read with four RED bars
that indicate low, medium, and high power levels. If all four bars are illuminated
red, the
GoCharge Power Pack is fully charged (fi g. 3).
Slide the (3) Power switch to ON. The (4)Power LED will glow BLUE indicating that it
is ready to charge your mobile device. Simply connect the appropriate USB cable
to one of the the
(9) Dual USB Charging ports , and then connect the other end to
your mobile device.
Note: If you’re not using the backup battery to charge your mobile device, please
slide the
(3) Power switch to OFF.
Press the (8) LED light button to turn ON the (7) LED fl ashlight. Press it again to turn
OFF the (7) LED fl ashlight.
The GoCharge Power Pack is equipped with (9) Dual USB charging ports so you
can charge up to two USB devices at once while in the car.
Simply connect one or both of your devices to the (9) Dual USB charging ports .
Slide back the (5) DC barrel cover and fl ip-out the (6) DC barrel. Plug the (6) DC
barrel into your DC car outlet and you will see the (4) Power LED glow BLUE to
indicate charging.