Accessory Power Go Grppve BlueBar, Инструкция по эксплуатации

Страница: 5 / 6

Using the BlueBar with other devices
Other headsets- The BlueBar can be used with any headphones or earbuds
that have a 3.5mm plug. Just insert your headphone’s 3.5mm plug into the
(5) 3.5mm line-in port on the BlueBar .
Adapting a speaker system for Bluetooth
The BlueBar can also be connected to speaker systems with a 3.5mm input.
Connect the BlueBar via 3.5mm cable (not included) to the 3.5mm AUX input
on your speaker. Pair your mobile device with BlueBar and begin playing
music. You will hear music come through your speaker system when correctly
connected.
Why can’t I get the BlueBar to pair with my mobile device?
a) Please make sure BlueBar is in PAIRING MODE and that (1) Power LED indicator
lights are fl ashing. If not, please turn off the BlueBar and start from the beginning
of Pairing your mobile Bluetooth device to the BlueBar instructions.
Why can’t I play music via Bluetooth using my mobile device?
a) Please make sure that your Bluetooth mobile phone supports A2DP (advanced
audio distribution profi le) connection, and that it has been paired properly.
b) Please make sure only one device is paired to the
BlueBar at a time. When you
disconnect a device from the BlueBar you will hear two short tones.
Why can’t I hear any sound?
a) Please make sure that the BlueBar is fully charged and powered ON. When the
BlueBar is ON the (1) Power LED indicator will fl ash blue periodically.
b) Please make sure that the volume on your mobile device and the BlueBar are
loud enough.
c) Make sure that your mobile Bluetooth device is within 30 feet of the
BlueBar .
The maximum Bluetooth range may vary in diff erent environments, or with
diff erent mobile devices.
Troubleshooting: