Accessmatic omni swing, Руководство пользователя

Страница: 16 / 19

Opening your life
omni
DIGITAL PROGRAMMING OF MANEUVER TIME WITH THE COMMAND
2. - Once we have made step 1, press the "PROG TIME" button on the control board, the led will remain fixed (programming is open).
3. - Press "BUTTON 1" of the remote the master door will begin to open. Wait for a time and press "BUTTON 2", the slave door will begin
to open.
4. -Press again the "BUTTON 1" to start the soft stop at the master door, and press "BUTTON 2" to start the soft stop is slave door. (This
function only works if the "SOFT STOP" option is activated (option 7).
5. - Press "BUTTON 1" again to finish the maneuver of opening in the master door and press "BUTTON 2" to finish the maneuver of
opening in the slave door.
6. - We will perform the closing maneuver by pressing "BUTTON 2" of the remote so that the slave door begins to close. Wait for a time
and press "BUTTON 1", the master door will begin to close
7. - Press again the "BUTTON 2" to start the soft stop in slave door, and press "BUTTON 2" to start soft stop is master door. (This function
only works if the "SOFT STOP" option is activated (option 7).
8. - Press the "BUTTON 2" again to finish the closing maneuver in the slave door and press "BUTTON 1" to finish the master door closing
maneuver.
If you use only one motor, make the programming process as if there were two motors.
PEDESTRIAN OPTION
This option will be done by recording on the channel 2 of the receiver a button different from the one selected to open the door. Each
time we press this button we will open or close only the master door. If both doors are open, this option does not work.
PROGRAMMING A DEVICE
1. Download and install the “AccessHub” application from Google Play or Apple Store. Register a new account.