2
4
2
CERTIFICATION:
ETL WET
NO.
20786LED
3
MOUNT THE MOUNTING BOX
Expose the supply wire
s
from the J-box.
Mount the mounting box to the J-box with the supplied
screws.
MAKE WIRE CONNECTIONS
Gently pull the supply wires through the hole in the
back housing. Connect the black supply
wire to the black
fixture wire. Secure with the supplied wire nuts.
Connect the white supply wire to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wire
s
with electrical tape (not supplied).
Tuck all wires carefully into the mounting box.
Close and tighten the bottom screw
at the back
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS FIXTURE
