x
x
x
Use 'slot' to fix
to frame work
Use black strap through
hole to fix pipework to bracket
P10
WATERING
Fit the irrigation system as shown.
The grey tubes push into the black
fittings. Ensure the open face of the
grey nozzle faces into the frame.
3
'L' shape brackets need to be fitted
inside the frame.
x - Use a nut and bolt to fix to the hole
2
z
AX2 model
BX2 & CX2 models
PARTS NEEDED:
NOZZLE ASSEMBLY
AX2
B/CX2
1
2
SINGLE TEE
2
BLANKING PLUG
3
‘L’ BRACKET
AX2
B/CX2
1
2
GREY PIPES
AX2
B/CX2
2
3
ENTRY FITTING:
Nipple, adaptor, washer and
brass elbow
1
10MM BOLTS & NUTS
AX2
B/CX2
1
2
BLACK STRAPS (short)
B/CX2 only
(long)
3
1
Located in pack: I-SP-1
Nozzle fitted to bracket
Fit the washer
onto the thread
of the adaptor,
and then fit the
Push the
assembly
through the hole
from the inside
Screw the brass
elbow onto the
protruding thread
from the outside
1
Choose which end you would like the watering inlet.
x
x
x
Use 'slot' to fix
to frame work
Use black strap through
hole to fix pipework to bracket
TIP:
Dip the end of the
grey pipe in water. For a
better fit, twist the pipes as
they are inserted.
4
Use the black straps to secure the watering system to the 'L''
shaped brackets and then strap the pipes to the end of the
frame using the hole in the leg. The long strap is used to secure
the pipe to the top leg at position ‘Z’ (BX2 & CX2 only).
Fit the black grommet (from pack SCREW-H1) into the unused
irrigation hole at the opposite end of the unit.
Nozzle strapped to ‘L’
bracket
Inlet and link pipe
Blanking grommet
