Manual 104-QUAD-8
8
Chapter 2: Installation
A printed Quick-
Start Guide (QSG) is packed with the board for your convenience. If you’ve already
performed the steps from the QSG, you may find this chapter to be redundant and may skip forward to
begin developing your application.
The software provided with this PC/104 Board is available for download from the product page on our
website at
It is also optionally available for a nominal cost on CD (must specify
when ordering product) and must be installed onto your hard disk prior to use. To do this, perform the
following steps as appropriate for your operating system. Substitute the appropriate drive letter for your
CD-ROM where you see d: in the examples below.
CD Installation
The following instructions assume the CD-
ROM drive is drive “D”. Please substitute the appropriate
drive letter for your system as necessary.
Windows
1.
Place the CD into your CD-ROM drive.
2.
The system should automatically run the install program. If the install program does not run
promptly, click START | RUN and type
, click OK or press
.
3.
Follow the on-screen prompts to install the software for this board.
Linux
1.
Please visit
https://github.com/accesio/Linux_PC104_legacy
for Linux support for this board
family. Also, you may refer to linux.htm on the optional CD-ROM for information on installing
under linux.
