Manual USB-FLEXCOM4
9
Ordering Guide
USB-FLEXCOM4
USB to four port RS-232/422/485 serial adapter
USB-COM232-4A
USB to four port RS-232 serial adapter
Model Options
•
-OEM Board only version with no enclosure
•
-HDR 10-pin male headers instead of DB9 connectors (only available on -OEM version)
•
-DIN
DIN rail mounting bracket for integrating into legacy and industrial environments
•
-RoHS Call for pricing, then add this suffix to the model number on a faxed or e-mailed PO
•
-T
Extended operating temperature of -
40 to +85˚C
•
-PR
Reg5VDC external power option
•
-WI
Wide input power supply voltage range of 7VDC to 30VDC
•
–RI
Enables Ring Indicator per specified port on USB-FLEXCOM4 versions only
•
-LK
Substitutes standard USB 2.0 type A to B cable with a type A to locking B cable
•
-PLK
Substitutes standard DC power input jack with a latching Molex connector
Special Order
Custom baud rates are achievable by using a different integrated circuit chip. Contact
factory with your requirement. Other examples of special orders would be conformal coating,
un-biased transmitter lines, etc.
Included with your board
The following components are included with your shipment, depending on options ordered.
Please take the time now to ensure that no items are damaged or missing.
•
USB Module in labeled enclosure with an anti-skid bottom
•
6' USB 2.0 cable
•
Software Master CD
•
USB I/O Quick-Start Guide
Optional Accessories
•
C104-10F-12
Ribbon Cable Assembly, 12” with 10 pin female headers on each end
•
STB-10
Screw Terminal Board, 10 pin male header
•
DIN-SNAP6
DIN-rail mounting for one STB-10
•
ADAP9
Screw Terminal Adaptor with a Male DB9 connector and 9 screw terminals
Figure 1-2:
ADAP9 Screw Terminal Accessory
