ACCES I/O Products, Inc.
MADE IN THE USA
mPCIe-ICM485-4
2
manual revision A1h
C
HAPTER
1:
Q
UICK START
It is recommended that you install the software package before
installing the PCI Express Mini Card (mPCIe) in your computer. You
can install the software
1
using either a stand-alone installer
downloaded from the website or an optional Software Master CD.
Run the installer you downloaded (or autorun.exe on the Software
Master CD) and follow the prompts to install the software for your
device.
Please note: during the installation you may be prompted regarding
the installation of non-WHQL-certified drivers; please carefully
confirm the digitally signed source of the drivers and accept the
installation.
Once the software has been installed, shut down your system and
carefully install the mPCIe card.
Re-start your system. Once the computer finishes booting your
new serial ports should already be installed and ready for use; you
can confirm this by launching Device Manager and looking under
the “Ports” section
. If, for any reason, the mPCIe or its ports
display a warning triangle, right-
click and select “Update Driver”.
1
In Linux or OSX please refer to the instructions in those directories.
C
HAPTER
2:
I
NTRODUCTION
PCI Express Mini Card (mPCIe), a low-profile small-footprint bus
standard originally intended for adding peripherals to notebook
computers, has become the de-facto standard for high-
performance, small form-factor devices in many applications.
•
2- or 4- port RS485 serial interface on mPCIe
•
Tru-
Iso™ pr
ovides signal isolation recognized under IPC-
2221B and IEC 60950-1
o
500V port-to-port, 1500V port-to-PC isolation
o
2500 VRMS Max Transient Isolation
o
848 Volt Peak Max Work Isolation
•
3 Mbps, up to 12M with factory option
•
RoHS and Industrial temperature standard
The mPCIe-ICM485 family of cards feature high performance
16C950-class UARTs. Each port is capable of communication
speeds up to 921.6kbps and has 128-byte deep transmit and
receive FIFOs which protect against data loss in multitasking
operating systems, reduce CPU utilization, and improve data
throughput. The advanced integrated circuit supports a wide
variety of custom baud rates, and any rates not otherwise
achievable can be supported via a factory-installed custom crystal
oscillator.
The ports provided by the card are 100% software compatible with
industry-standard serial COM devices. In addition, they provide
Tru-
Iso™ port
-to-port and port-to-PC isolation.
Communication is possible either with custom application
software, with off-the-shelf applications (such as HyperTerminal),
or with provided samples and utilities, including
WinRISC™
(“Windows Really Incredibly Simple Communication”
).
The serial ports on the device are accessed using a low-profile
latching 5-pin Hirose connector. Optional breakout cable kits are
available, and bring each port connection to a panel-mountable
DB9-M.
There are no user-selectable option settings for this device family.
C
HAPTER
3:
H
ARDWARE
These models are full-
length “F1”
mPCIe devices (30 × 50.95 mm).
All units are RoHS compliant and support Industrial temperature
environments (-40°C to 85°C operating, -65°C to 150°C storage.)
INCLUDED IN YOUR PACKAGE
Four- or two-port mPCIe-ICM422 or mPCIe-ICM485 card
Printed QuickStart Guide
Available accessories include:
CAB-mPCIe-ICM2S Two port DB-9 cable accessory kit
CAB-mPCIe-ICM4S Four port DB-9 cable accessory kit
ADAP9 DB-9 Screw Terminal Accessory
mPCIe-HDW-KIT2 Mounting hardware for 2mm
mPCIe-HDW-KIT2.5 Mounting hardware for 2.5mm
Contact the factory for information regarding additional
accessories, options, and specials that may be available to best fit
your specific application requirements.
C
HAPTER
4:
C
ONFIGURATION
S
ETTINGS
This product has no user configurable hardware options. All
possible configuration settings can be performed through the
industry standard UART drivers in your operating system.
This manual applies to the following models:
mPCIe-ICM485-4 Four port RS485 Tru-
Iso™ mPCIe device
mPCIe-ICM485-2 Two port RS485 Tru-
Iso™ mPCIe device
