Accent DUO II, Сборка и инструкция по эксплуатации, Страница: 10 / 16

10
www.accentworkspaces.co.nz
4. Low Voltage protection (E08)
Power Voltage is too low for the controller, this is a safety cut out protection. System will recover as soon
as voltage returns to normal.
5. High Voltage protection (E09)
Power Voltage is too high for the controller, this is a safety cut out protection. System will recover as
soon as voltage returns to normal.
6. Control Box or Handset Issue (E10)
If Handset display E10 and will not disappear, control box or handset is broken.
E. WARRANTY NOTICE
1. This product must be used under the correct technical parameters.
2. Keep away from liquids, corrosives, gases and dusty environments.
3. Do not open any of the components, doing so will void any and all service support and manufactures
warranties.
“1” Button - Return to previous menu
“UP” / “DOWN” Button - Select menu
“M” Button - Confirm menu
F. CHANGING BETWEEN CM AND INCH-1UN
Keep pressing Button “M” for 3 seconds, Handset will display “S---”, then release pressing Button “M”
and press Button “M” again, the code “1Un” will then appear.
Press Button “M” to enter.
1. It will display , you can press “M” button to preserve cm display and please wait for 2 seconds it
will display current height(cm).
2. After it displays , you can press button “Up”/“Down” to change it to , press button “M” to preserve
inch display and please wait for 2 seconds it will display current height(inch).
G. SETTING HANDSET DISPLAY BRIGHTNESS-2BR
1. Keep pressing button “M” for 3 seconds. Handset will display “S---”, then release pressing button “M”
and press button “M” again to enter, the code “1Un” will then appear.
2. Press button “Up”/“Down” to be 2br.
Then press button “M” to enter, this will display current display brightness level (L/ /H).
L: Means low brightness, :Means normal brightness, H: Means high brightness.
3. Press button “Up”/“Down” to select your favorite brightness level, then press button “M” to preserve
and quit, please wait for 2 seconds and it will display current height.