Accent BALANCE DESK, Инструкция по сборке

Страница: 7 / 20

0800 126 826 | support@accentworkspaces.co.nz
7
Attach the extendable beam to the end legs and the inline legs as per above. Make sure the beam is mounted
closer to the back of the legs. Open side of the beam should face the back of the desk. Use a nylon hammer
to hit the beam down into place.
Extend beams out so that the end of the leg is flush with the end of the desk top. Attached end legs frames
and extendable beams to the desk top using bolt B. (Desk tops will be pre- drilled for the legs). Using the bolts
supplied with the beams, install 2 bolts front and back of the beam.
STEP
1
STEP
2
STEP
3
Place the table tops on to the leg frame, attach the table top to the frame using the wood screws provided.
INLINE DESK 2POD
ASSEMBLY INSTRUCTION