Step One: Positioning the Seek satellite speakers
Step One: Positioning the Seek satellite speakers
Step One: Positioning the Seek satellite speakers
Step One: Positioning the Seek satellite speakers
Please refer to the industry's recommendations for speaker placement below:
1) Primary seating position.
2) Your front speakers should be positioned on either side of the screen with an angle of 22 to 30
degrees towards the primary seating position.
3) Position the centre speaker as close as possible to the TV and directed towards the primary seating
position.
4) The optimum location for surround speakers is on either side of your seating position. Alternative
placement is the back corner of the room.
5) The recommended initial subwoofer placement is in line with the front speakers. Alternative placement
is along the side wall. For larger rooms additional subwoofers may be introduced as required.
Step Two: Connecting the speakers
Step Two: Connecting the speakers
Step Two: Connecting the speakers
Step Two: Connecting the speakers
Speaker Cable Options:
Speaker Cable Options:
Speaker Cable Options:
Speaker Cable Options:
The Seek
Seek
Seek
Seek satellites connect to your home theatre receiver via standard figure 8 speaker cables.
In addition to the supplied speaker cables, many different styles and sizes are available. See fig 2,3 & 4
Speaker Cable Size:
Speaker Cable Size:
Speaker Cable Size:
Speaker Cable Size:
18 gauge wires are ideal for runs of 6-7 metres (supplied). Beyond 7 metres please use 16 gauge wires.
The Seek
Seek
Seek
Seek satellite speaker terminals are colour coded
RED
RED
RED
RED
for positive “+” and BLACK
BLACK
BLACK
BLACK for negative “-”.
Polarity:
Polarity:
Polarity:
Polarity:
Every speaker cable has an “identifier” for polarity. This identifier could include the branding of the cable, a
printed line or a moulded ridge. This identifier MUST connect to the same colour terminals on your receiver /
amplifier and speaker. Accidental reversal of the cables will dramatically reduce overall sound performance.
Prepare the Cable:
Prepare the Cable:
Prepare the Cable:
Prepare the Cable:
Remove / strip away approximately 20mm (3/4inch) of the insulator. Please refer to Fig 2 & 3 below as a
guide.
Fig 2
Fig 3
Fig 4
Setting up your Hide & Seek
Setting up your Hide & Seek
Setting up your Hide & Seek
Setting up your Hide & Seek 5.1 High Fidelity Speaker Package
5.1 High Fidelity Speaker Package
5.1 High Fidelity Speaker Package
5.1 High Fidelity Speaker Package.
