Accelleron A100-H Series, Руководство по сборке

Страница: 13 / 24

Assembly Instructions / Turbocharger A100-H
4 Installing the turbocharger / 4.2 Fitting threaded rods
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved. HZTL455311P0004_EN Rev. D March 2023
4.2 Fitting threaded rods
Fig. 5: Fitting threaded rods onto the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods
Fig. 6: Requirements for threaded rods
Product Diameter
Threaded rod
[mm]
Material
DIN / ISO 898 (Part
1)
Thread length
L1 [mm]
Length of
threaded rod
L2 [mm]
A130-H Ø 16 / M16 10.9 / 12.9 ≥ 30 250
A135-H Ø 20 / M20 10.9 / 12.9 ≥ 30 325
A140-H Ø 24 / M24 10.9 / 12.9 ≥ 70 410 … 420
Table 5: Requirements for threaded rods
The threaded rods and nuts for fastening the turbocharger on the bracket are not included in the Ac-
celleron scope of delivery. The clamping nuts are included in the Accelleron scope of delivery.
Page
11
/
21