13 of 28
Accelerated Concepts, Inc. © 2013
NetReach User Guide
Configuration Check Interval
– this field allows you to specify the amount of time
between when the unit checks the configuration server. The value is in minutes and can
be from 10 to 1440 (one day). During initial setup you can specify a low value to allow
for tuning the units configuration. When the unit is fully configured the time can be
lengthened if desired.
Remote Control Check Interval
– NetReach will check for remote control flags within
the listed interval. Valid values are 0-59 minutes. Setting to 0 disables this feature.
ANMS Configuration Enabled
– Use ANMS configuration profile.
Analytics Mode
– Log information on other nearby wireless APs and unassociated client
devices. Note: the NetReach's SSIDs will be unavailable if Analytics Mode is enabled.
Station Query
– Scan for nearby wireless Aps (access points).
Client Monitor
– monitor client devices connected to SSIDs.
UPNP Enabled
– Toggle UPnP (Universal Plug-n-Play) feature.
Enable Admin Access
– this check box lets you enable local login to the device. If you
only wish to configure this device through ANMS leave this box unchecked.
User ID
– the Userid that can be used by the local administrator.
Password
– the password for the local administration Userid.
Time
Enable DST
– indicate whether you wish to enable day light savings time for this device.
Timezone
– the time zone in which the device is located. This drop-down will have all
major time zones available for selection.
