Accelerated 6310-DX, Руководство пользователя

Страница: 114 / 235

Sample Sample
The sample configuration below shows an Accelerated device with two cellular Internet
connections: one using the 1002-CM module and the other using a supported USB modem.
Failover is set to assume the USB modem (ISP 1) is the primary connection, with the 1002-CM
(ISP 2) serving as the backup that will step in should the primary line fail, though this can be
adjusted as needed by altering the
Metric Metric
value for each interface. Accelerated devices support
both failover and load balancing between available Internet connections.
Sample Dual Modem aView Configuration Sample Dual Modem aView Configuration
1. Under Network > Modems > Add Modem Network > Modems > Add Modem, create a new entry named "usb." The name can
be different if desired.
2. Change the Match modem by Match modem by to "Port."
3. Change the Match port Match port to "USB port: External."
4. Under Network > Interfaces Network > Interfaces, create a new entry named "usbmodem." The name can be
different if desired.
5. Change the Interface type Interface type to "Modem."
6. Change the Zone Zone to "External."
7. Change the Device Device to "usb" (the modem entry we created in Step 1 above).
8. Under Network > Interfaces > usbmodem > IPv4, Network > Interfaces > usbmodem > IPv4, change the Metric Metric to "1" (this sets the
external USB modem as the primary modem).
9. Click Save. Save.
User Manual
Page 114 Page 114 6310-DX