Accelerated Concepts, Inc. ©2015
6300-CX User’s Guide
20 of 30
ACCELERATED.COM
Router Mode
In this mode, the device operates as a standard DHCP router. The device will be configured to hand out a range of
LAN IP addresses to client devices connected on its Ethernet port. Standard router options are available in the device’s
configuration, including DHCP lease options, DNS options, firewall options, and port forwarding rules.
The following list of steps details how to setup a simple DHCP server on the device in router mode.
1.
Login to Accelerated View and use the Search tool to find the device by searching for its MAC address.
2.
Select the MAC address of the device to bring up its details page.
3.
Select the View Configuration link in the Configuration section of the page.
4.
Once viewing the configuration profile, select the Edit pencil icon at the top right of the page.
5.
Change the
Interface Type
under the
LAN
network section from
DHCP
to
Static IP Address
.
6.
In the
Address
, enter in the IP address you wish to assign to the device
for its LAN DHCP network (i.e. the gateway IP for the DHCP network).
7.
Open the
DHCP Server
section and select
Enable
.
8. Click
Save
to apply the configuration changes.
Learning More
In depth details on using Accelerated View
can be found in the Accelerated View User’s Guide.
Internet
Cellular Gateway
Client IP
Client IP
Client IP
Sample Diagram showing Passthrough Mode
6300-CX
Client Laptop
Client Workstation
Client Register
Switch Hub