RAID setting
Notice:
Data will be deleted when setting RAID
modes, please backup your data first!
There are 4 RAID modes supported
The default mode is JBOD
Set the RAID mode with switches
Note:
The white part represents the dip
switch position
www.acasis.com
SPAN:
Recognize one drive and the capacity is the sum of the two
hard disks
Example:
750GB=1750GB
Setting:
Set both switches upward
Note:
The computer will recognize it as a mass storage device
RAID 0:
Recognize one drive and the capacity is twice the smaller
hard disk's
Example:
750GB=1500GB
Setting:
Set both switches downward
Note:
Read from and write to two disks simultaneously to get
faster speed.If any hard disk fails, all data will be lost
RAID 1:
Recognize one drive and the capacity is the smaller hard
disk Data will be backuped to another hard disk at the
same time
Example:
750GB=750GB
Setting:
Set No.1 Switch upward, Set No.2 Switch downward
Note:
If any hard disk fails, all data is still well reserved
JBOD:
Recognize two hard drives (factory default setting mode)
Setting:
Set No.1 Switch downward, Set No.2 Switch upward
Note:
The computer will recognize two independent hard drives
separately. It is the recommended mode, if just one hard
disk will be used
Содержание DT-S2
Страница 1: ...www acasis com Dual 2 5 SATA HDD RAID Enclosure User Manual DT S2...
Страница 6: ...www acasis com...
