19
12-03. Adv Setup
Read Error Skip
Press
ENT
to enter the following figure. The default is Off. Press
▼
to select On.
Read Error Skip
Off
5.1.4 Format HDD
Now press
ESC
and
▼
to enter the following figure. Format HDD is to partition the hard disk. But
before formatting, all data on the hard disk will be deleted.
12-04. Adv Setup
Format HDD
If your copy controller doesn’t connect with a hard disk, LCD will show the message as follows.
No Valid HDD!
Select HDD First!
5.1.5 Verify HDD
Now press
ESC
to return to Function 12, and then select part 5 Verify HDD as the following figure
shows. Verify HDD is to verify if the hard disk or any of its partitions can work well.
12-05. Adv Setup
Verify HDD
Press ENT to enter the next figure. Use
▲
▼
to confirm Disk or Parti.
Press
ENT
to verify. After verification LCD will show the results as follows.
Overburn
Off
5.1.6 Burn-in
Now press
ESC
and
▼
to enter the following figure. Burn-in is to simulate the copying progress
many times. The time can be from 1 to 1000. After each cycle of simulation, the DVDs on the DVD
writers will eject automatically and recede for the next bout of simulation.
Verify Disk or
Paration? Disk
ARS-2057/2050/2050P Manual
