Acard ARS-2021D Скачать руководство пользователя страница 71

Страница: 71 / 80

ARS-2021D/2021DS Manual

Chapter 7 Troubleshooting

7.1 About LCD

After powering on if there is no LCD, please check if the connection of power cord

is frim and the environment of power outlet is normal.

7.2 About Error Messages

During Copy, Test, Compare and Verify, etc. if you press

ESC

to abort, an error

message will appear on LCD. Abortion may cause ARS-2021D/2021DS to hang up,

therefore you have to power on again.

If reading fails, an error message will appear on LCD. Please get a new source DVD

to try again.

If ARS-2021D/2021DS hasn’t detected any device after powering on, an error

message will appear on LCD.

7.3 About DVD-ROM/DVD Writer

If a DVD-ROM or DVD writer cannot read, please confirm the format of the source

DVD and check if it is damaged.

Use any DVD writer to read the source DVD. If it works, the DVD-ROM is probably

defective or not compatible with the source DVD.

Use a fine DVD writer as the data reader, and set the “Read Speed” at minimum.

Содержание ARS-2021D
















































































Результаты поиска

Содержание ARS-2021D

Отзывы:

Бренды по названию

Популярные бренды

Acard ARS-2021D, Руководство пользователя

Результаты поиска

Содержание ARS-2021D

Отзывы:

Бренды по названию

Популярные бренды