48
ARS-2021/2021S Copy Smart Plus
6.12.4 Format Hard Disk
This setting controls will initiate the hard drive and delete al of the
Images.
Read Error Skip
Off
Using arrow button to change “On” or “Off” setting
then press “ENT” or press “ESC” to go back 12-
03 manual.
UnderRun Protect
On
12-02. Adv Setup
Overburn
Overburn
On
12-03. Adv Setup
Read Error Skip
6.12.2 Overburn
This setting controls turns on the CD writer which has overburn
function. Default setting is “Off”.
6.12.3 Read Error Skip
This setting controls error skipping during source is reading. The
default setting is “Off”. When an error is detected during source
loading, the duplicator will stop to load and display read error
message. If the setting is “On”, there will be no message shown
even there is an error in reading. You can use this function to copy
some CD with errors.
Using arrow button to change “On” or “Off”
setting then press “ENT” or press “ESC” to go
back 12-01 manual.
Press “ENT” button to enter “Overburn” and
“ESC” to exit.
Using arrow button to change “On” or “Off”
setting then press “ENT” or press “ESC” to go
back 12-02 manual.
Press “ENT” button to enter “Read Error Skip”
and “ESC” to exit.
