2 1
Cha
Cha
Cha
Cha
Chapter 4.
pter 4.
pter 4.
pter 4.
pter 4. Cop
Cop
Cop
Cop
Copy Smar
y Smar
y Smar
y Smar
y Smart as hosted CD dri
t as hosted CD dri
t as hosted CD dri
t as hosted CD dri
t as hosted CD drivvvvves
es
es
es
es
4.1 Connect Copy Smart to host computer
Step 1
: Please make sure your computer has SCSI host adapter installed,
and that SCSI host adapter should be LUN enable. (
Please refer the
user manual of SCSI host adapter. If you use ACARD’s SCSI
adapter, you could refer to Appendix F.
)
Step 2
: Connect Copy Smart to SCSI host
adapter with external SCSI cable.
Note: ARS2020 Copy Smart is use just one SCSI ID
only, and provides two CD drives for host
computer, please check LUN function enable
on your system.
4.2 Cofigruing Copy smart
Step 1
: Setting up SCSI ID. DO NOT use the same SCSI ID with other SCSI
devices which are on same SCSI bus.
Step 2
: Setting up SCSI termination On/Off.
If Copy Smart is the last device on SCSI bus, user should set SCSI
termination ON, Or should be OFF.
4.3 Hardware requirement
CPU
: Pentium-100 /
RAM
: 32MB
H.D.D.
: 75MB free space on hard drive.
Interface
: Ultra SCSI host adapter installed
4.4 Software requirement
O.S.
: Windows 95/98/ME, or Windows NT4/2000
Utilities
: Ha! CD Burner for the CD recording software. And SCSIDE
utilities, it can configures/updates Copy Smart.
Optional Utilities
: Adaptec EZ-CD creator, Direct-CD which are fully
compliant for Copy Smart.
Adjust SCSI ID
Chapter 4. Copy Smart as hosted CD drives